Moving Fence Instructions

EARLY ACCESS — MOVING FENCE



Watch the Webinar and/or Instructional video here


eShepherd - How to setup a Moving Fence


eShepherd - Moving Fence Webinar Sep 2026



Before turning on your moving fences, please go through the checklist here


Moving Fence Animal Welfare Checklist



How to create a Creep Mode Moving Fence in the web app


  1. Select the "Move Plans" tab and click the add (+) button.
  2. Select "Shift Only".
  3. Name the "Move Plan" if needed.




  1. Draw the Moving Fence start line. Make it longer than the widest part of the paddock to prevent animals from going around the ends during shifts.
  2. Rename the Moving Fence from "Moving Fence 1" if desired.
  3. Set "Move Distance" to the distance you want the Moving Fence to travel.
  • Select "Switch Direction" to change the direction of travel.
  • Enter how long you want the Moving Fence to run, in days and hours.




  1. If you do not require a "Back Fence" then click the green tick next to the Moving Fence name to add it to your "Move Plan".
  2. You can add another Moving Fence (e.g. if your paddock is not uniform) or click the tick icon and create the "Move Plan".




How to create a Creep Mode Moving Fence with a back fence


  1. To add a static or moving back fence, tick the "Back Fence" checkbox and enter the distance, in meters, behind the front fence.
  2. Once you have entered all the details, click the green tick next to the Moving Fence name to add it to your "Move Plan".




  1. You can then add another Moving Fence or click the green tick icon to create the "Move Plan".


How to create a Strip Grazing Moving Fence with a back Fence


  1. Select the "Move Plans" tab, click the add (+) button and select "Shift Only". Name the move plan if needed.
  2. Draw the Moving Fence start line. Make it longer than the widest part of the paddock to prevent animals from going around the ends during shifts.
  3. Rename the Moving Fence from "Moving Fence 1" if desired.
  4. Set the "Move Distance" to how far you want the Moving Fence to travel.
  5. Select "Switch Directions" to change the direction of travel.
  6. Tick the "Back Fence" checkbox, choose "Stay" or "Move" and enter the distance between the back and front fences.
  7. Select "Strip Grazing".
  8. Choose "Duration" to set how long the Moving Fence will run, or "Release Rate" to set how many meters of pasture are released per hour. Enter the required values in "Duration" or "Pasture Release".




  1. Click the green tick next to the Moving Fence name to add it to your "Move Plan".


You can then add another Moving Fence or click the tick icon to create the "Move Plan".


How to create a Shift & Contain Moving Fence


  1. Create a virtual paddock (VP) that covers the entire area you want the animals to access during the move. If the VP is too small, its boundary will hold the animals back while the Moving Fence continues forward.




  1. In the "Move Plans" tab, select "Contain & Shift" and rename the "Move Plan" if desired.
  2. Select the virtual paddock you created from the "Virtual Paddock" drop-down menu.
  3. Then click "Add MF".
  4. Follow the Creep Mode or Strip Mode instructions above to set up your Moving Fence.


How to turn on a Moving Fence


  1. In the "Move Plans" tab select the move plan you want to turn on, then click the power icon.
  2. Choose the mob and set the start time for the "Move Plan".
  3. Click the tick icon to confirm.


Note: To check that the Moving Fence is scheduled correctly, go to the "Mobs" tab and select your chosen mob. To see how many animals have received the Moving Fence schedule, go to the "Status" tab.




Moving Fence and oddly shaped paddocks




For an irregularly shaped paddock, you can schedule multiple Moving Fences and VPs to guide your animals through the paddock.

Updated on: 14/09/2026

Was this article helpful?

Share your feedback

Cancel

Thank you!